Inertia Dynamometer Chassis with standard wheel base up to 84 inches
	Measures up to 500 horsepower
	Dynoware EX+ hardware includes:CPU Module, Dyno Module, Atmosperic Sensing Module and RPM Module
	Primary Wire Inductive tachometer pickup
	Secondary Inductive Pickups (spark plug clamps connect directly to spark plug wires)
	WinPEP Software, Windows 95 to Windows 2000
	Built-in starting system (requires battery)
	Switch Operated Air Over Hydraulic Brake (requires 75psi line pressure)
	Installation and Operation manuals provided on CD-ROM
	Remote Software and Brake Control From Driver's Seat
	Toll free technical support

Dynojet Research has established a reputation for manufacturing state-of-the-art dynamometers for a wide variety of vehicles. The tradition continues with the introduction of the first dynamometer engineered for Kart racing and ATV applications. Model 168 features an outside-to-outside drum spacing of 56 inches and is recommended for testing Karts & ATV's with rear spacing of up to 56 inches.

The Kart/ATV Dynamometer simulates seat of the pants road testing right in the shop. A quick vehicle mounting system allows set-up and testing in under 5 minutes, saving valuable preparation time. Sophisticated testing and graphing capabilities record not only horsepower and torque, but also highlight electrical, fuel, clutch slippage and drive train problems in an easy to interpret manner. There's very little maintenance and no calibration necessary. Any shop's sales, service work and credibility will benefit with a Dynojet Kart/ATV Dynamometer.

Maximum Horsepower	750hp +
Maximum Speed	200MPH (322Kph)
Maximum Length	N/A
Drums	1
Drum Diameter	18"
Drum Width	16.375"
Drum Weight	500 pounds (227Kg) total
Drum Inertia (approx.)	12-12.5 Kg Force 2
Drum Concentricity	+/-0.001 Inch (+/-0.025mm)
Dynamometer Weight	1650 pounds
Crated Dynamometer Weight	1750 pounds
Drum Material	A 106 Steel
Shaft Material	2 3/16 inch 1144 turned ground & polished steel
Frame Material	10 Gauge Cold Roll Steel
Power Requirements	110v 60Hz or 220/240v 50Hz
Remote Switches	Remote Software Control
Hardware Timing Accuracy	+/-1 microsecond
Drum Speed Accuracy	+/-1/100th Mph
RPM Accuracy	+/-1/10th RPM

Depending on your current configuration, there are several options that can be added to your Dynojet Dynamometer to meet your individual needs. All of these options can be added from the factory at time of original dyno purchase, or purchased separately at any time thereafter. Contact Dynojet's Product Specialists at 1-800-992-3525 for pricing and availability.

• Find out more about our PERK Program
• Find out more about our WINPEP Website
• Check on an upgrade/accessories table below for more info.

ACCESSORY / UPGRADE MODEL 168/188 Air/Fuel Ratio Module Dual Multi-Axis Cooling Fan System Monitor Tray Air Brake/EEC Safety --- Eddy Current Load Absorption Unit Above Ground Kit Power Clamp/Carriage Torque Cell Package Motorcycle Carriage Extended Carriage X Fat Boy Wheel Adapter Folding Ramp X = Available X = Not Available ---  = Standard

"I have owned Dynojet Dynamometers for over 10 years. In all that time, I have had to do almost no maintenance. Aside from changing the filters in my "real time" Air/Fuel system and cleaning the chassis, there is really nothing to do. I can spend my time doing what is important - developing my team's racing engines."
----------Chuck Graves- Graves Yamaha Racing

Toll Free:	800-992-4993
Locally:	702-399-1423
Physical Address:	Dynojet Research, Inc. 2191 Mendenhall Drive North Las Vegas, NV 8908

(*) Indicates required fields.

Name: *

Email: *

Product: * Model 168 / 188 Other

Inquiry Details:*

Are you an international or USA customer, select one, please: USA International

Note: We encourage customers to contact our sales support staff via telephone. Contacting us via telephone will ensure quicker service, and our sales experts can answer any question directly with specific details. Thank you.