Dynojet ATV Kart Dynamometers

ATV / KART DYNO MODELS

Model 168/188

MORE INFO

OUR PRODUCTS

ATV/KART DYNO HARDWARE

DynoWare EX

Tuning with a Dynojet dyno has never been easier! With the addition of our new Wideband air/fuel ratio module, every dyno run can show you not only horsepower and torque, but also exact air/fuel ratio. This takes the guesswork out of fueling adjustments. The air/fuel ratio graph shows a rich/lean condition at each RPM range during the dyno run.

ATMOSPHERIC SENSING MODULE

The Atmospheric Sensing Module measures absolute pressure, air temperature, and relative humidity. These measurements are used by the WinPEP dynamometer software to correct power and torque measurements to standard atmospheric conditions according to an SAE, DIN, or EEC formula.

RPM MODULE

The RPM Module receives and processes signals from up to 2 inductive pickups for measurement of engine RPM. Each input has an automatic gain circuit to compensate for a wide variance of ignition systems.

DYNAMOMETER I/O MODULE

The Dynamometer Input/Output Module sends and receives data from the dynamometer and the handheld pendant. The module also contains a buzzer and light which are activated when either the tire or dynamometer speed limit is approached.

CPU MODULE

The CPU Module contains a 32-bit processor which acquires data from the expansion modules and communicates the data to the computer running the WinPEP software. The processor queries the expansion modules to determine which modules are connected. The CPU Module fastens to an attractive stand for placement on the computer or work bench. Each additional module then plugs conveniently into the one below it, providing expansion for future modules..