Eddy Current Load Absorption Unit, Torque Cell, and dynamic load control software.
Perform loaded tests, including step, sweep, and wind drag simulation.
WinPEP7 Software and Hardware to interface (PC, printer, etc. not included)
Automatic Conditions Measurement (absolute pressure, air temp, humidity)
Ignition Wire Inductive Tachometer Pickup Leads
Auto Tie Down Package (straps, ratchets and ground hooks)
Four Rubber Chocks
Air Actuated Brake System
Remote Software and Brake Control From Driver's Seat
Installation, operation manuals and software tutorial
One year replacement parts warranty
PRODUCT FEATURES
This Model 224xLC can perform load tests including step, sweep and loaded roll-on.
The torque cell calibration routine takes less than a minute to perform
PRODUCT FEATURES
The 224xLC can be configured for in-ground installation or above ground using a
four-post lift.
SPECIFICATIONS
Maximum Horsepower
2000hp +
Maximum Speed
200MPH (322Kph)
Wheelbase Minimum
N/A
Wheelbase Maximum
N/A
Drums
1
Drum Diameter
24"
Drum Width
81"
Minimum Axle Width
N/A
Maximum Axle Width
79"
Maximum Axle Weight
3000 lbs
Calibration
Quick-call (included)
OBD2 Link
Optional
EZ RPM
Optional
Optical RPM Pickup
Optional
Pit Covers/Above-Ground Kit
Optional
Wide Band Air/Fuel Ratio System
Optional
Eddy Current
Standard
Air Requirements
100 psi
Operating Temp Range
32 to 158 degrees F
Timing Accuracy
+/-1 microsecond
Drum Speed Accuracy
+/-1/100th MPH
RPM Accuracy
+/-1/10th RPM
Chassis Dyno
Standard
WinPEP7 Software
Standard
Dynoware EX+
Standard
Primary RPM Lead
Standard
Secondary RPM Leads
Standard
Anchors
Standard
Tie Downs
Standard
Rubber Chocks
Standard
Air Brakes
Standard
Remote dyno control
Standard
Operators Manual
Standard
Installation Manual
Standard
Eddy Current Retarder
Standard
Pit Covers
Optional
Above Ground Kit
Optional
4-Post Lift
Optional
Optical RPM Sensor
Optional
Air Fuel Ratio Meter
Optional
SHOP REQUIREMENTS
120volt AC 60Hz or 220volt AC 50Hz (optional)
Compressed Air 40-100psi (with dryer)
Exhaust Removal System
External Vehicle Cooling System
IBM Compatible Computer
PRODUCT UPGRADES OPTION ACCESSORIES
Depending on your current configuration, there are several options that can be added
to your Dynojet Dynamometer to meet your individual needs. All of these options
can be added from the factory at time of original dyno purchase, or purchased separately
at any time thereafter. Contact Dynojet's Product Specialists at 1-800-992-3525
for pricing and availability.
Opt* = Only available
for Model 248 pit dynamometers
WHAT OUR CUSTOMERS WHO BOUGHT THIS UNIT ARE SAYING
"We tune hundreds of vehicles every month for major OEM's, manufacturers, and individual
vehicle owners over the past 20 years, and no other dyno - not the Mustang, Dyno
Dynamics, SuperFlow or any other unit have ever served us as well or as consistently
as the Dynojet 224xLC. Dynojet provided us with a wonderful product, top-notch Tech
Support, and professional on-site training. This has been the single most important
purchase we have made in the past year here at Troyer Performance."
---------- Mike Troyer - Performance Products, Inc. DBA / Troyer Performance
CONTACT OUR SALES TEAM
Toll Free:
800-992-3525
Locally:
702-399-1423
Physical Address:
Dynojet Research, Inc.
2191 Mendenhall Drive
North Las Vegas, NV 89081
