WinPEP7 Software and Hardware to interface (PC, printer, etc. not included)
Auto Tie Down Package (straps, ratchets and hooks)
Ignition Wire Inductive Tachometer Pickup Leads
Anchor Bolts with Level Adjusters
Four Rubber Chocks
Air Actuated Brake System
Remote Software and Brake Control From Driver's Seat
Automatic Conditions Measurement (absolute pressure, air temp, etc.)
PRODUCT FEATURES
Expanding the Dyno Owner's capabilities, Dynojet has teamed it's industry standard
chassis dyno with a 4-post lift. Now you can make changes to exhaust, gears, driveshafts
and other drivetrain modifications right on the dyno. The dyno with the lift option
is excellent for dyno owner's who lease their building and cannot construct a pit.
Through the use of state-of-the-art computer technology, the Model 248x Dynamometer
allows you to quickly and accurately diagnose performance problems.
Model 248 HW
The Model 248HW is specific for testing vehicles with dual rear wheels and having
axle weights up to 10,000 lbs. This model is wider to accommodate dual rear wheels,
an increased axle weight limit, and additional mass as compared to the Model 248x
dyno. Please call Dynojet Research, Inc. to discuss your specific application.
SPECIFICATIONS
Maximum Horsepower
2000hp +
Maximum Speed
200MPH (322Kph)
Wheelbase Minimum
N/A
Wheelbase Maximum
N/A
Drums
2
Drum Diameter
48"
Drum Width
26"
Minimum Axle Width
29.5"
Maximum Axle Width
96"
Maximum Axle Weight
3000 lbs
AWD Attachment
Only with Pit Option
OBD2 Link
Optional
Optical RPM Pickup
Optional
Pit Covers/Above-Ground Kit
Optional
Wide Band Air/Fuel Ratio System
Optional
Current Braking System
Not Available
Air Requirements
60 psi Minimum
Operating Temp Range
32 to 158 degrees F
Timing Accuracy
+/-1 microsecond
Drum Speed Accuracy
+/-1/100th MPH
RPM Accuracy
+/-1/10th RPM
Chassis Dyno
Standard
WinPEP7 Software
Standard
Dynoware EX+
Standard
Primary RPM Lead
Standard
Secondary RPM Leads
Standard
Anchors
Standard
Tie Downs
Standard
Rubber Chocks
Standard
Air Brakes
Standard
Remote dyno control
Standard
Operators Manual
Standard
Installation Manual
Standard
Dynotrac Load Control
Optional
Pit Covers
Optional
Above Ground Kit
Optional
4-Post Lift
Optional
Optical RPM Sensor
Optional
Air Fuel Ratio Meter
Optional
SHOP REQUIREMENTS
120volt AC 60Hz or 220volt AC 50Hz (optional)
Compressed Air 40-100psi (with dryer)
Exhaust Removal System
External Vehicle Cooling System
IBM Compatible Computer
PRODUCT UPGRADES OPTION ACCESSORIES
Depending on your current configuration, there are several options that can be added
to your Dynojet Dynamometer to meet your individual needs. All of these options
can be added from the factory at time of original dyno purchase, or purchased separately
at any time thereafter. Contact Dynojet's Product Specialists at 1-800-992-3525
for pricing and availability.
Opt* = Only available
for Model 248 pit dynamometers
WHAT OUR CUSTOMERS WHO BOUGHT THIS UNIT ARE SAYING
"I rely on our Dynojet Dynamometer every day for EFI Tuning. It has giving us years
of reliable service and allows me to tune cars in less then half the time compared
to the street. A Dynojet dynamometer is must for any tuning shop. It's an indispensable
tuning tool and has generated new business for our shop."
---------- Martin Musial - President, Automotosports Inc. (AMS)
CONTACT OUR SALES TEAM
Toll Free:
800-992-3525
Locally:
702-399-1423
Physical Address:
Dynojet Research, Inc.
2191 Mendenhall Drive
North Las Vegas, NV 89081
