Remote Software and Brake Control From Driver's Seat
Four Rubber Chocks
Model 424xLC2can be configured for above-ground installation with the use of a four-post
lift and all-wheel drive above ground platform assembly or below ground into a pit
WinPEP7 Software and Hardware to interface (PC, printer, etc. not included)
Auto Tie Down Package (straps, ratchets and hooks)
Ignition Wire Inductive Tachometer Pickup Leads
Four Rubber Chocks
Air Actuated Brake System
Remote Software and Brake Control From Driver's Seat
Automatic Conditions Measurement (absolute pressure, air temp, etc.)
PRODUCT FEATURES
As with the 224xLC, load tests can be performed including step, sweep and loaded
roll on. Closed loop load testing is also available by targeting engine RPM. A simple
click of the mouse or keyboard can turn this Model 424xLC2 back into an inertia
only dynamometer or into a dual eddy current unit.
The torque cell calibration routine takes less than a minute to perform. Each eddy
current unit attaches to the roller directly by way of a splined shaft, eliminating
issues such as belt slippage or failure while maintaining superior repeatability.
CONFIGURATION
Model 424xLC2 can be configured for above-ground installation with the use of a four-post
lift and all-wheel drive above ground platform assembly or below ground into a pit.
Wheelbase is adjustable between 88" - 130" (optional 98" - 140") in order to accommodate
a wide variety of vehicles.
SPECIFICATIONS
Maximum Horsepower
1500hp +
Maximum Speed
200MPH (322Kph)
Wheelbase Minimum
Standard 88" Optional 98"
Wheelbase Maximum
Standard 130" Optional 140"
Drums
1 per axle
Drum Diameter
24"
Drum Width
86"
Minimum Axle Width
N/A
Maximum Axle Width
81"
Maximum Axle Weight
3000 lbs
4WD
Standard
OBD2 Link
Optional
EZ RPM
Optional
Optical RPM Pickup
Optional
Pit Covers/Above-Ground Kit
Standard
Wide Band Air/Fuel Ratio System
Optional
Eddy Current
Standard
Air Requirements
100 psi
Operating Temp Range
32 to 158 degrees F
Timing Accuracy
+/-1 microsecond
Drum Speed Accuracy
+/-1/100th MPH
RPM Accuracy
+/-1/10th RPM
Chassis Dyno
Standard
WinPEP7 Software
Standard
Dynoware EX+
Standard
Primary RPM Lead
Standard
Secondary RPM Leads
Standard
Anchors
Standard
Tie Downs
Standard
Rubber Chocks
Standard
Air Brakes
Standard
Remote dyno control
Standard
Operators Manual
Standard
Installation Manual
Standard
Eddy Current Retarder
Standard
Pit Covers
Optional
Above Ground Kit
Optional
4-Post Lift
Optional
Optical RPM Sensor
Optional
Air Fuel Ratio Meter
Optional
SHOP REQUIREMENTS
120volt AC 60Hz or 220volt AC 50Hz (optional)
Compressed Air 40-100psi (with dryer)
Exhaust Removal System
External Vehicle Cooling System
IBM Compatible Computer
PRODUCT UPGRADES OPTION ACCESSORIES
Depending on your current configuration, there are several options that can be added
to your Dynojet Dynamometer to meet your individual needs. All of these options
can be added from the factory at time of original dyno purchase, or purchased separately
at any time thereafter. Contact Dynojet's Product Specialists at 1-800-992-3525
for pricing and availability.
Opt* = Only available
for Model 248 pit dynamometers
WHAT OUR CUSTOMERS WHO BOUGHT THIS UNIT ARE SAYING
"I rely on our Dynojet Dynamometer every day for EFI tuning. it has giving us years
of reliable service and allows me to tune cars in less than half the time compared
to the street. A Dynojet Dynamometer is must for any tuning shop. It's an indispensable
tuning tool and has generated new business for our shop"
--- Martin Musial - President, Automotosports Inc. (AMS)
CONTACT OUR SALES TEAM
Toll Free:
800-992-3525
Locally:
702-399-1423
Physical Address:
Dynojet Research, Inc.
2191 Mendenhall Drive
North Las Vegas, NV 89081
