Inertia Dynamometer Chassis with standard wheel base up to 84 inches Measures up to 750 horsepower, 200 MPH Dynoware EX+ hardware includes: :  CPU Module: Com Port Interface, runs on 12VDC & 110VAC :  Dyno Module: Sends and receives data to and from the Dyno :  Atmosperic Sensing Module: Automatically measures absolute pressure, air temperature and relative humidity :  RPM Module: Receives and processes ignition (spark) signals for correct engine speed measurement Control Panel with Arm Primary Wire Inductive tachometer pickup Secondary Inductive Pickups (spark plug clamps connect directly to spark plug wires) WinPEP 7 Software Bike Starter System (requires battery) Wheel Lock Installation and Operation manuals provided on CD-ROM Dynamometer training course provided with every dyno purchase Toll free technical support line 1 Year replacement part warranty

DIMENSIONS (Above Ground Model)

Base Length 79.83" (202.8 cm) Base Width 42.50" (108.0 cm) Base Height 18.10" (45.9 cm) Drum Diameter 18" (45.72 cm) per wheel Drum Width 16.37" (41.59 cm) Drum Concentricity +/- 0.001" (+/-0.025 mm) Maximum Bike Length 84" (213.4 cm)

WEIGHT

Dynamometer 1600 lbs (725 Kg) (approx.) Crated Dynamometer 1700 lbs (771 Kg) (approx.) Drum Weight 875 lbs (397 Kg)

MATERIAL

Drum A 106 Steel Shaft 2 3/16 inch 1144 turned, ground & polished steel Frame 10 Gauge Cold Roll Steel

PERFORMANCE SPECIFICATIONS

Modeled Mass (Standard) 450 lbs (204 Kg) (approx.) Modeled Mass (High-Inertia) 650 lbs (295 Kg) (approx.) Maximum Horsepower 750 hp Maximum Speed 200 mph Maximum Torque 750 ft/lbs Temperature Range 32 o F to 158 o (0 o C to 70 o C)

GENERAL

Calibration Not required (factory callibrated) Inductive Pickup Primary Wire RPM Pickup Power Requirements 240v 30amp single phase circuit Remote Switches Remote Software Control

HARDWARE

Timing Accuracy +/- 1 microseconds Drum Speed +/- 1/100th MPH RPM Accuracy +/- 1/10th RPM

Depending on your current configuration, there are several options that can be added to your Dynojet Dynamometer to meet your individual needs. All of these options can be added from the factory at time of original dyno purchase, or purchased separately at any time thereafter. Contact Dynojet's Product Specialists at 1-800-992-3525 for pricing and availability. Find out more about our WINPEP Website Check on the upgrade/accessories table below for more info.

ACCESSORY / UPGRADE MODEL 200i MODEL 250i Data-Link for Harley-Davidson Delphi ECM Application Air/Fuel Ratio Module (Requires installation or availability of shop air) Dual Multi-Axis Cooling Fan System Monitor Tray Air Brake Eddy Current Load Absorption Unit --- Power Clamp/Carriage Torque Cell Package X Extended Carriage Fat Boy Wheel Adapter Folding Ramp = Available X = Not Available ---  = Standard

>

Toll Free:	1-800-992-3525
Locally:	702-399-1423
Physical Address:	Dynojet Research, Inc. 2191 Mendenhall Drive North Las Vegas, NV 89081

(*) Indicates required fields.

Name: *

Email: *

Product: * Model 200i Model 250i Other

Inquiry Details:*

Are you an international or USA customer, select one, please: USA International

Note: We encourage customers to contact our sales support staff via telephone. Contacting us via telephone will ensure quicker service, and our sales experts can answer any question directly with specific details. Thank you.