dynojet
dynojet
dynojet
dynojet
Model 250i Quick Features
  • The Dynojet Load Control System was developed through years of experience with over 3,900 dynamometer installations worldwide
  • The design is easy to operate and provides the function of steady state load control
  • Dynojet's Load Control System uses the latest in eddy current power absorption technology, which combines with our easy to use software, so any technician can get repeatable, consistent results
PACKAGE INCLUDES
Closed-loop control of Speed or RPM
Easy-to-use software, push button operation
Test Vehicles at full or partial throttle
Absorption unit capable of 858 lb/ft torque
Compact design
Ignition Wire Inductive Tachometer Pickup Leads
Optional closed -loop Torque control module
Four Rubber Chocks
Remote Software and Brake Control From Driver's Seat
Inertia Dynamometer Chassis with standard wheel base up to 84 inches
Measures up to 750 horsepower
Primary Wire Inductive tachometer pickup
Secondary Inductive Pickups (spark plug clamps connect directly to spark plug wires)
WinPEP7 Software
Bike Starter System (requires battery)
Wheel Lock
Installation and Operation manuals provided on CD-ROM
Dynamometer training course provided with every dyno purchase
Toll free technical support line
1 Year replacement part warranty
Dynoware EX+ hardware includes:
:  CPU Module: Com Port Interface, runs on 12VDC & 110VAC
Dyno Module: Sends and receives data to and from the Dyno
Atmosperic Sensing Module: Automatically measures absolute pressure, air temperature and relative humidity
RPM Module: Receives and processes ignition (spark) signals for correct engine speed measurement

Contact Us
| What's New | Support | Dyno Centers | | Privacy Policy | Dynojet-TV | Site Map
© 1995 - Dynojet Research, Inc. All rights reserved.