EFI TUNING PRODUCTS

POWER VISION CX 

FLASH TUNER / DATALOGGER

With the Power Vision CX, you are now a flash away from dominating the competition by unlocking the hidden power and torque that lurks within. Available for Polaris and Can-Am Off-Road vehicles, the Power Vision CX interfaces with the ECU through the diagnostic connector and allows you flash new tunes, view live data, and log data to the on-device memory

The Power Vision CX product Suite includes a handheld flash device, vehicle interface cable, and Power Core (Windows PC based tuning and data logging application)

PERFORMANCE TUNE FEATURES

  • FUELING REVISED FOR MAXIMUM POWER AND TORQUE
  • SPARK TIMING OPTIMIZED FOR 91-93 OCTANE FUEL
  • REV LIMIT RAISED IN HIGH AND LOW GEARS
  • SPEED LIMIT RAISED IN HIGH AND LOW GEARS
  • TORQUE LIMITING FUNCTIONS REDUCED OR ELIMINATED
  • REVISED DRIVE-BY-WIRE THROTTLE PROFILES FOR HIGH AND LOW GEARS
  • LOWER FAN TURN-ON TEMPS
  • LEFT FOOT BRAKE MODE ENABLED
  • RETAINS ADC AND TURF MODE WHERE APPLICABLE

WIDEBAND CX

POWER VISION CX AFR ACCESSORY

  • SEAMLESSLY INTEGRATES AFR DATA WITH THE OEM DATABUS
  • VIEW AND DATALOG WIDEBAND O2 DATA ALONGSIDE CUSTOM CHANNELS DIRECTLY FROM THE VEHICLES DIAGNOSTIC PORT
  • STORE DATALOGS IN THE POWER VISION CX’S MEMORY FOR LATER REVIEW IN POWER CORE SOFTWARE SUITE

DYNOJET CLUTCH KITS 

Each kit includes redesigned arms with magnetic weights giving you the flexibility needed to adjust the primary clutch allowing the engine to operate at the optimum RPM to obtain peak power. When appropriately paired for the modifications performed, springs and a redesigned helix (where applicable) can decrease belt temperature, reduce belt wear, and optimize the shift rate for maximum power transfer to the wheels.

CLUTCH KIT FEATURES

  • Increased top speed over stock and power transmission to the wheels.
  • Improved vehicle response by way of:
    • — Faster back shift
    • — Improved acceleration
    • — Smooth engagement
  • Optimized belt tension for increased belt life and cooler belt temps
  • Dyno Developed and field tested by the world leader in Powersports Testing and Tuning

 

Dynojet RZR Turbo HP2 Kit

Developed in-house and put through rigorous testing our new high performance upgrade kit is guaranteed to boost your 2016-18 Polaris RZR Turbo to its maximum potential. Once installed, expect to see a minimum increase of 38% more raw power on the 2016 model and a 20% increase on 2017-18 models.

Dynojet RZR Turbo HP2 Kit
  • Reconditioning of your factory turbocharger consisting of a rebalanced compressor and turbine housing, high-performance billet compressor wheel, exhaust turbine, new bearings, and seals.
  • Charge tube with an integrated blow-off valve
  • ICE-T (Intercooler Coolant Expansion Tank)
  • Clutch kit
  • Power Vision CX with custom tune.
  • Fuel Injectors- 2016 model only

Fitment:

Part #: 96090000, Fits: 2016 Polaris RZR XP Turbo

Part #: 96090001, Fits: 2017-2018 Polaris RZR XP Turbo

Learn More

Dyno Graphs

Dynojet is offering you a minimum of a 20% increase in raw power on a 2017+, or an astonishing 38% gain for you 2016 XPT owners.

2016 Polaris RZR XP Turbo

16 Polaris RZR XP Turbo

2017-2018 Polaris RZR XP Turbo

17-18 Polaris RZR XP Turbo

 

CanAm Fuel Injector Upgrade

Dynojet RZR Turbo HP2 Kit

The OEM fuel system is designed to supply the engine with the fuel it requires at all operating conditions. It does this fairly well, but the injector duty cycle (IDC) typically approaches its limit of 100% when conditions are ideal or if you’ve added aftermarket performance parts. In order to lower the IDC and support stock or tuned X3 power levels, Dynojet now offers a high flow injector upgrade kit.

  • Set of high flow injectors, 48lb/hr at 57 psi (2017 model year) and 51lb/hr (2018 model year)
  • Dynojet Power Vision CX Custom Tune
    • Pump gas tune
    • OEM like drivability
    • Lower injector duty cycle - supports a wide range of power levels
    • No guesswork, Dynojet’s custom tune is designed for these injectors
  • Plug and play – uses OEM injector connectors

Fitment:

Part #: 96040001, Fits: 2017-2018 CanAm Maverick X3

Learn More

Dyno Graph

CanAm Fuel Injector Upgrade keeps Injector Duty Cycles (IDC) in the safe 80% range.

2017 CanAm Maverick X3

17-18 CanAM Injector Graph

 

Intercooler Coolant Expansion Tank (ICE-T)

Keep the Boost Up and Temps Down

The design isolates the engine coolant from the intercooler coolant and yields lower air charge temperatures. Whether you’re running stock or elevated boost pressures you’ll be rewarded with a cooler, denser air charge that increases power and lowers the chance for power robbing and potentially destructive detonation.

As boost pressure builds, so do air charge temps and your ECM will pull back timing. This will cost you power, but the Dynojet ICE-T keeps your RZR Turbo running hard and avoids power reductions. If the situation calls for it, you can even drop a bag of ice in the tank for an “ace in the sleeve” edge.

Fitment:

Part #: 96020001, Fits: 2016 Polaris RZR XP Turbo

Part #: 96020002, Fits: 2017-2018 Polaris RZR XP Turbo

Learn More

Intercooler Coolant Expansion Tank (ICE-T)

 

Active Power Mode Switch

The Dynojet Active Power Mode Switch allows you to switch tunes on the fly from the comfort of the drivers’ seat. No need to interrupt your ride and go through the process of flashing your ECM, simply select the mode you desire and the tune instantly changes. Our pre-configured profiles (Mode A, B, and C) are now embedded as a standard Power Vision CX feature and included in our latest tunes.

The choice is yours; whether you prefer the “take no prisoners” flat out performance of Mode A, the more docile stock-like nature of Mode B, or the power limited Mode C for new drivers.

Fits: 2016-2018 Polaris RZR XP Turbo

Part #: 76100016, Fits: 2016-2018 Polaris RZR XP Turbo

Learn More