Dynojet Automotive Dynoware RT and PowerCore

The next generation of Dynojet dynamometer Electronics and Software has arrived.

DynoWare RT is the next generation of Dynojet dynamometer electronics and provides dyno owners with several new features such as: high-speed Ethernet communications to PC, wireless network capability, multiple expansion ports for current and future upgrades, updateable firmware/software via online, built-in true 0-5v Analog Channels and more. The dyno’s configuration file is now embedded inside the DynoWare RT module, so now you can simply connect to any PC that has PowerCore installed. DynoWare comes standard with new Dynojet dynamometers and is available as an upgrade for existing Dynojet models.

10 Button Remote Sample Pendant

The DynoWare RT sample pendant allows you to start/stop sampling, apply the brake to slow or stop the roller, enable and use load control on eddy current equipped models, and navigate inside the WinPEP 8 software without touching a computer.

AFR-2 (Dual Air/Fuel System)

AFR-2 Module measures up to two air/fuel ratio readings simultaneously!

The AFR-2 has two wide band O2 sensor inputs so you can sample two air/fuel ratios at the same time for measuring bank-to-bank. The AFR-2 uses the DJ-CAN system, which allows you to daisy-chain multiple AFR-2 modules to read up to 8 AFR’s. The AFR-2 houses the Gen4 air pump system and comes standard with one O2 sensor. Additional sensors can be purchased at a low cost.

PowerCore is a new PC based application that provides Dynojet Dyno owners with the most advanced tuning software platform available in the industry! Control the dyno, analyze data, adjust/create calibrations and maps for Dynojet products and utilize real-time on-board data from vehicles running on the dyno.

WinPEP 8 Dyno Control

Connects PowerCore to DynoWare RT; shows data live on gauges, starts/stops sampling, and sets up other functions such as load control and other dyno specific functions.

Selectable RPM source used for logging/load control –Inductive, Optical, OBDII, DJ-CAN, or 3rd party RPM source
Channel support for Dynojet OBII Data-Link Interface
Editable gauge screen with user defined data channel selection, scaling and more.

WinPEP 8 Data Center

Provides enhanced viewing and analysis tools for dyno runs, DJ-CAN devices, .csv format data logs, and 3rd party sources. Views include graph/trace, table, and 3-D visualization.

Synchronize data channels from the DynoWare RT system in perfect alignment with channels from supported systems, giving the ability to “see” what happened and where. Become a better tuner as a result of getting better data.
Customization options allow users to adjust the software format and viewing to their liking, and provides better export viewing, printing and more.
Backwards compatible to all previous WinPEP and DOSPEP dyno runs, so users can use previous dyno run files.

Shop Requirements for Dynamometer

Components	Minimum Requirement	Suggested
Operating System	Windows 7 or later	Windows 7 or later
Processor	Dual Core Processor, 2GHz or faster	Intel Core i5 2.8GHz or faster
Memory	4GB System Ram	8GB System Ram or more
Hard Drive	100GB or larger (54MB required for program)	500GB or larger (54MB required for program)
Monitor/Graphics Card	1280x1024 (SXGA) resolution or higher	1600x900 (WSXGA) resolution or higher
Network Adapter	1 free 10/100Mbps RJ45 Ethernet port	1 free 10/100Mbps RJ45 port on IP router, wireless or wired and internet access
External Media	CD ROM drive	CD ROM drive
Printer	Printer, if prints are needed	Color printer if prints are needed.
Power	240V