Dynojet remains committed to the needs of the Powersports and Dyno community. While taking the appropriate precautions for the safety and well-being of our customers and employees, we are continuing to fulfill all orders and support our customers. Additionally, we are extending our return policy at this time.
We are here for all your Powersports/Dyno needs and are shipping out orders as usual!
×

What is Rev X-tend on Dynojet’s Power Commander V?

What is Rev X-tend on Dynojet’s Power Commander V?

What is Rev X-tend?

Rev X-tend is a feature within the Power Commander that allows you to change the engine’s rev-limiter. This feature can only be used on some models where the Power Commander has control of the vehicle’s ignition. If you have a “Fuel Only” PC5 unit, you would need to add an Ignition Module accessory to use the Rev X-tend feature.

What models PC5 includes Rev X-tend?

Some PC5units have Fuel and Ignition Control “built-in” to one unit. In most of those units, you can use the Rev X-tend feature. Most of those Rev X-tend compatible units are pre-configured to give you 500 RPM more than the stock rev-limiter, without the need for any key-code. You can get 500 RPM more than stock just by checking the box and enabling the Rev X-tend feature from the software. Some Fuel and Ignition PC5 units that have a pre-configured Rev X-tend feature that gives 500 RPM more than stock include units for Harley Davidson, Victory motorcycles, and many Honda, Yamaha, Kawasaki , and Suzuki models that only have only one or two cylinders.

In the Power Commander V software you can enable Rev X-tend by going to Power Commander Tools>Configure>Feature Enable and Input Selections.

Do I need Rev X-tend to run my bike on the dyno?

No.

Why would I need to adjust my RPM?

The Rev X-tend feature can be setup to lower a engine’s rev-limiter. You might want to lower the rev-limit RPM to limit the power output for a novice rider. In most circumstances the feature is used to raise the rev-limiter for a modified engine that has the capability of producing more power at higher RPMs.

How do I set my RPM to a different configuration?

In some cases, you can get 500 RPM more than stock just by checking the Rev X-tend enabling checkbox in the Features window of the PC5 software. A key-code is needed if you want to set the Rev X-tend feature at any other RPM than what it is set at currently.


What is the key-code for?

A key-code is only needed if you want to set the Rev X-tend feature at any other RPM than what it is set at currently.
You must submit a Rev X-tend Request Form to get a key-code from Dynojet.

It can be faxed to 702-399-1431, or you can e-mail the form directly to tech@powercommander.com as an email attachment. Please make sure the serial number, return email address, and desired rev-limit are clearly legible and that the form has a signature.

As always, let us know if you have any questions.

Share